Back to Clubheads Main Page

Ashton MS-5 Driver

The MS-5 is actually 5 heads in one! Hence the name Multi-Sole 5 (MS-5). Choose from 5 configurations that allow you to custom fit each driver to your requirements. The MS-5 is the ideal blend of engineering, class, and versatility. It is available in the following configurations: Unique Moly-TiT face STD (Standard) version with the head weighing between 198g and 200g and neutral ball flight bias. HL (High Launch) version with the head weighing between 198g and 200g and a very low and deep Centre of Gravity. Great for Seniors, women and juniors. HW (Heavy Weight) version with the head weighing between 205g and 208g with a neutral bias. Ideal for low handicaps, professionals and those looking for higher swingweights when making drivers under 45". Typical of a tour spec driver. SL (Superlight) version tipping the scale between 190g and 192g with neutral bias. Great for seniors, women, junior, or anyone looking for more clubhead speed - including Long Drive Competitors. DR (Draw) version with the head between 198g and 200g and a definite draw bias. Weighted specifically in the heel to promote releasing the clubhead through the ball and encouraging a draw. The MS-5 comes in at 415cc, face height is 51mm, face length is 106mm. Color is deep high gloss black with 3 coats of clear coat. It is perhaps the classiest driver head you will ever come across. The finish on the face is a double satin finish with CNC milled grooves. The grooves actually work as an alignment aid in place of a crown marking. As a note, grooveless faces work best for 135mph+ clubhead speed. The combination of satin polish, grooves, bulge, and roll produce ideal launch conditions for every level of golfer when used with the right shaft. Full length headcover included. All lofts are USGA Approved. Coming soon: LH models and a low lofted LD version with X-1 scorelines! MS-5 LOFTS MODEL 8.5 9.5 10.5 11.5 12.5 14.5 STD • • • × • × HL × × • • • × HW • • • • × × SL × × • × • • DR • • • × • × SPECS Face Material Moly-Ti T Body Material Forged 90-6-4 Titanium Face Height 51mm +/-1mm Bore Depth 38mm +/-1mm Outside Hosel Diameter 12.8mm +/-0.5mm Inside Hosel Diameter 8.6mm (Std .335") +/-0.2mm Bulge & Roll 11.0 x 11.0 Back to Clubheads Main Page

Contact Dave:

E-mail: dewiz@rogers.com
Telephone: 1 (519) 241-9841